Ensapsultated transformers - E4209029 model

External protection

E4209

EI 42/8,5

External protection

3.2 VA - 40ºC/Transformer

CE Logo

Simple primary

Center tapped secondary

E4209

Weight/unit:

120 gr

E4209

Weight/bigbox (Units: 64)

7680 gr

HR Ref. Primary Sec. Sec. In

Vo

(In=0)

External protection Fuse
P1 P2 S1 S2 Is1 Is2

Sec. (F)

S1|S2

Prim. (T)

P1

E4209035 230 V - 4.5 V 4.5 V 356.0 mA 356.0 mA 2x(5.85) V 2x(400.0) mA 32.0 mA
E4209021 230 V - 6.0 V 6.0 V 267.0 mA 267.0 mA 2x(7.8) V 2x(315.0) mA 32.0 mA
E4209023 230 V - 7.5 V 7.5 V 213.0 mA 213.0 mA 2x(9.75) V 2x(250.0) mA 32.0 mA
E4209025 230 V - 9.0 V 9.0 V 178.0 mA 178.0 mA 2x(11.7) V 2x(200.0) mA 32.0 mA
E4209027 230 V - 12.0 V 12.0 V 133.0 mA 133.0 mA 2x(15.6) V 2x(160.0) mA 32.0 mA
E4209029 230 V - 15.0 V 15.0 V 107.0 mA 107.0 mA 2x(19.5) V 2x(125.0) mA 32.0 mA
E4209031 230 V - 18.0 V 18.0 V 89.0 mA 89.0 mA 2x(23.4) V 2x(100.0) mA 32.0 mA
E4209033 230 V - 24.0 V 24.0 V 67.0 mA 67.0 mA 2x(31.2) V 2x(80.0) mA 32.0 mA
E4209

Technical characteristics:

  • Designed and manufactured according regulations EN61558 EN60590 EN60472 UL506 UL1585
  • Two-chamber coil
  • Vacuum sealed
  • Safety transformer class II / Protection index IP00 (For all models with no load voltage lower than 50V according to EN61558, and to 30V according to UL1585)
  • External protection with fuse (See suggested type at table)
  • Self-extinguishing plastic UL94-VO
  • Epoxy resin class F
  • Isolation: Prim./Sec. = 10 MOhm to 500 Vcc - Sec./Sec. = 2 MOhm to 500 Vcc
  • Dielectric strength Prim. / Sec. = 5 kV / 1min.
  • Secondary voltage tolerances 5%
  • Test at 100% of all electrical parameters in production
  • Reliability tests for production batch (life term)
  • Certificates of production test results (under request)
  • Certifications VDE, UL (E346974); others certifications under request: CSA, SEMKO